Loading software on the DCL153x

Image	On all DCL153x terminals run an OS (operating system) and an application. The OS and the application can be loaded by a small PC application called APPLOAD.
Software codes	Both models of the DCL15xx terminals have their own Operating System version that can be distinguished by an unique 3 letter code (starting with 'LB'). Before you try to load a new Operating System on a DCL15xx you have to know which Operating System file (i.e. LBKVxxxx.S32 for the DCL1530) must be loaded on your terminal. In the table below you can find which software code belongs to which DCL15xx terminal. Code Terminal LBK DCL1530 LBN DCL1531
DCL1530	To load a new OS or application in the DCL1530 by cradle, set the cradle in auto baudrate mode. To load a new OS or application in the DCL1530 by USB cable, make sure that the device driver is loaded in the PC. Load OS Load application Automatic (USB cable) Connect the USB cable from DCL1530 to the PC and select the OS by appload. Automatic (USB cable) Connect the USB cable from DCL1530 to the PC and select the application by appload. Semi-automatic (cradle) Make sure that the DCL1530 is not powered down. Place the DCL1530 in the cradle and select the OS by appload. Semi-automatic (cradle) Make sure that the DCL1530 is not powered down. Place the DCL1530 in the cradle and select the application by appload. System menu (cradle) Press all three buttons at the same time. Use key 2 (Q2_KEY) to scroll to Download application. Press the trigger key to select. Place the DCL1530 in the cradle and select the OS by appload. System menu (cradle) Press all three buttons at the same time. Use key 2 (Q2_KEY) to scroll to Download application. Press the trigger key to select. Place the DCL1530 in the cradle and select the application by appload. System menu (USB cable) Press all three buttons at the same time. Use key 2 (Q2_KEY) to scroll to Download application. Press the trigger key to select. Place the DCL1530 in the cradle and select the OS by appload. System menu (USB cable) Press all three buttons at the same time. Use key 2 (Q2_KEY) to scroll to Download application. Press the trigger key to select. Place the DCL1530 in the cradle and select the application by appload.
DCL1531	To load a new OS or application in the DCL1531 by cradle, set the cradle in auto baudrate mode. To load a new OS or application in the DCL1531 by USB cable, make sure that the device driver is loaded in the PC. Load OS Load application Automatic (USB cable) Connect the USB cable from DCL1531 to the PC and select the OS by appload. Automatic (USB cable) Connect the USB cable from DCL1531 to the PC and select the application by appload. Semi-automatic (cradle) Make sure that the DCL1531 is not powered down. Place the DCL1531 in the cradle and select the OS by appload. Semi-automatic (cradle) Make sure that the DCL1531 is not powered down. Place the DCL1531 in the cradle and select the application by appload. System menu (cradle) Press all three buttons at the same time. Use key 2 (Q2_KEY) to scroll to Download application. Press the trigger key to select. Place the DCL1531 in the cradle and select the OS by appload. System menu (cradle) Press all three buttons at the same time. Use key 2 (Q2_KEY) to scroll to Download application. Press the trigger key to select. Place the DCL1531 in the cradle and select the application by appload. System menu (USB cable) Press all three buttons at the same time. Use key 2 (Q2_KEY) to scroll to Download application. Press the trigger key to select. Place the DCL1531 in the cradle and select the OS by appload. System menu (USB cable) Press all three buttons at the same time. Use key 2 (Q2_KEY) to scroll to Download application. Press the trigger key to select. Place the DCL1531 in the cradle and select the application by appload.